Malleable iron fittings · Dimensions

Malleable iron fittings: dimensions by GF number

You know the number – here are the dimensions. For every GF number we show the picture and dimensional sketch, all sizes with dimensions in millimetres and the availability in black and galvanized. The whole range is listed, including what we order in.

Range: GF malleable iron to EN 10242, range 2025
Per number: Picture · sketch · dimensions in mm · availability
Finishes: black · galvanized
Source: Dimensions and sketches: Georg Fischer

Choose the number

Each number opens its table: picture, dimensional sketch, all sizes with dimensions in mm and the availability in black and galvanized.

Range overview of GF malleable iron fittings: product photos of all common types from type 1 (90° bend) to type 933a, each with its GF type number — Range overview with GF type numbers – from bend type 1 to weld-on elbow type 933a. Image: Georg FischerClick a fitting – the table of its number opens.

All numbers as a list

● from stock · ○ to order · – available on request · / not made in this finish

Bends

No. 1 Long sweep bend 90° (G4) · 12 sizes

Dimensional sketch of fitting No. 1 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 1 Long sweep bend 90° (G4): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	z	black	galvanized
1/8	35	32	28	from stock	from stock
1/4	40	36	30	from stock	from stock
3/8	48	42	38	from stock	from stock
1/2	55	48	42	from stock	from stock
3/4	69	60	54	from stock	from stock
1	85	75	68	from stock	from stock
1 1/4	105	95	86	from stock	from stock
1 1/2	116	105	97	from stock	from stock
2	140	130	116	from stock	from stock
2 1/2	176	165	149	to order	from stock
3	205	190	175	to order	from stock
4	260	245	224	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 1a Short bend 90° (D4) · 11 sizes

Dimensional sketch of fitting No. 1a with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 1a Short bend 90° (D4): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	z	black	galvanized
1/4	30	30	20	from stock	from stock
3/8	36	36	26	to order	from stock
1/2	45	45	32	from stock	from stock
3/4	50	50	35	from stock	from stock
1	63	63	46	from stock	from stock
1 1/4	76	76	57	to order	from stock
1 1/2	85	85	66	to order	from stock
2	102	102	78	from stock	from stock
2 1/2	115	115	88	from stock	from stock
3	127	127	97	to order	from stock
4	165	165	129	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 2 Long sweep bend 90° (G1) · 11 sizes

Dimensional sketch of fitting No. 2 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 2 Long sweep bend 90° (G1): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	z	black	galvanized
1/4	40	30	from stock	from stock
3/8	48	38	from stock	from stock
1/2	55	42	from stock	from stock
3/4	69	54	from stock	from stock
1	85	68	from stock	from stock
1 1/4	105	86	from stock	from stock
1 1/2	116	97	to order	from stock
2	140	116	from stock	from stock
2 1/2	176	149	from stock	from stock
3	205	175	to order	from stock
4	260	224	from stock	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 2a Short bend 90° (D1) · 11 sizes

Dimensional sketch of fitting No. 2a with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 2a Short bend 90° (D1): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	z	black	galvanized
1/4	30	20	to order	from stock
3/8	36	26	from stock	to order
1/2	45	32	from stock	from stock
3/4	50	35	from stock	from stock
1	63	46	from stock	from stock
1 1/4	76	57	from stock	from stock
1 1/2	85	66	from stock	from stock
2	102	78	from stock	from stock
2 1/2	115	88	to order	from stock
3	127	97	from stock	from stock
4	165	129	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 3 Long sweep bend 90° (G8) · 9 sizes

Dimensional sketch of fitting No. 3 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 3 Long sweep bend 90° (G8): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	b	black	galvanized
1/4	33	from stock	from stock
3/8	42	to order	to order
1/2	48	from stock	from stock
3/4	60	to order	from stock
1	75	from stock	from stock
1 1/4	95	from stock	from stock
1 1/2	105	from stock	from stock
2	130	from stock	from stock
2 1/2	165	not made in this finish	to order

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 40 Long sweep bend 45° (G4/45°) · 11 sizes

Dimensional sketch of fitting No. 40 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 40 Long sweep bend 45° (G4/45°): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	z	black	galvanized
1/4	26	21	16	from stock	from stock
3/8	30	24	20	from stock	from stock
1/2	36	30	23	from stock	from stock
3/4	43	36	28	from stock	from stock
1	51	42	34	from stock	from stock
1 1/4	64	54	45	from stock	from stock
1 1/2	68	58	49	from stock	from stock
2	81	70	57	from stock	from stock
2 1/2	99	86	72	to order	to order
3	113	100	83	from stock	to order
4	141	130	105	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 41 Long sweep bend 45° (G1/45°) · 10 sizes

Dimensional sketch of fitting No. 41 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 41 Long sweep bend 45° (G1/45°): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	z	black	galvanized
3/8	30	20	to order	from stock
1/2	36	23	from stock	from stock
3/4	43	28	from stock	from stock
1	51	34	from stock	from stock
1 1/4	64	45	from stock	from stock
1 1/2	68	49	to order	from stock
2	81	57	from stock	from stock
2 1/2	99	72	from stock	to order
3	113	83	to order	from stock
4	141	105	not made in this finish	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 50 Bend 30° · 9 sizes

Dimensional sketch of fitting No. 50 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 50 Bend 30°: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	z	black	galvanized
1/2	30	24	17	not made in this finish	from stock
3/4	36	30	21	not made in this finish	from stock
1	44	36	27	not made in this finish	from stock
1 1/4	52	44	33	not made in this finish	from stock
1 1/2	56	46	37	not made in this finish	from stock
2	66	54	42	not made in this finish	from stock
2 1/2	80	66	53	not made in this finish	to order
3	92	77	62	not made in this finish	from stock
4	114	100	78	not made in this finish	to order

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: galvanized

↑ Back to the type selection

No. 51 Bend 30° · 6 sizes

Dimensional sketch of fitting No. 51 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 51 Bend 30°: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	z	black	galvanized
1/2	30	17	not made in this finish	from stock
3/4	36	21	not made in this finish	from stock
1	44	27	not made in this finish	from stock
1 1/4	52	33	not made in this finish	to order
1 1/2	56	37	not made in this finish	from stock
2	66	42	not made in this finish	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: galvanized

↑ Back to the type selection

No. 53 Bend 15° · 7 sizes

Dimensional sketch of fitting No. 53 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 53 Bend 15°: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	z	black	galvanized
1/2	28	21	15	not made in this finish	to order
3/4	33	25	18	not made in this finish	from stock
1	37	29	20	not made in this finish	from stock
1 1/4	43	34	24	not made in this finish	from stock
1 1/2	45	35	26	not made in this finish	to order
2	51	41	27	not made in this finish	from stock
2 1/2	62	52	35	not made in this finish	to order

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: galvanized

↑ Back to the type selection

No. 54 Bend 15° · 6 sizes

Dimensional sketch of fitting No. 54 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 54 Bend 15°: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	z	black	galvanized
1/2	28	15	not made in this finish	to order
3/4	33	18	not made in this finish	to order
1	37	20	not made in this finish	to order
1 1/4	45	26	not made in this finish	from stock
1 1/2	47	28	not made in this finish	to order
2	51	27	not made in this finish	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 60 Return bend · 6 sizes

Dimensional sketch of fitting No. 60 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 60 Return bend: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	z	black	galvanized
1/2	45	38	32	to order	to order
3/4	52	50	37	to order	to order
1	64	64	47	to order	to order
1 1/4	73	76	54	to order	to order
1 1/2	80	89	61	to order	to order
2	90	102	66	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 85 Crossover · 6 sizes

Dimensional sketch of fitting No. 85 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 85 Crossover: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	black	galvanized
3/8	to order	to order
1/2	to order	from stock
1/2	to order	from stock
3/4 × 3	available on request	available on request
1	from stock	to order
1 1/4	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 87 Tee with crossover branch · 1 size

Dimensional sketch of fitting No. 87 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 87 Tee with crossover branch: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	black	galvanized
1/2	not made in this finish	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

Elbows

No. 90 Elbow 90°, equal (A1) · 30 sizes

Dimensional sketch of fitting No. 90 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 90 Elbow 90°, equal (A1): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	z	z1	z2	black	galvanized
1/8	19		12			from stock	from stock
1/4	21		11			from stock	from stock
3/8	25		15			from stock	from stock
1/2	28		15			from stock	from stock
3/4	33		18			from stock	from stock
1	38		21			from stock	from stock
1 1/4	45		26			from stock	from stock
1 1/2	50		31			from stock	from stock
2	58		34			from stock	from stock
2 1/2	69		42			from stock	from stock
3	78		48			from stock	from stock
4	96		60			from stock	from stock
1/4 x 1/8	20	20		10	13	to order	from stock
3/8 x 1/4	23	23		13	13	to order	from stock
1/2 x 1/4	24	24		11	14	from stock	from stock
1/2 x 3/8	26	26		13	16	to order	from stock
3/4 x 1/2	30	31		15	18	from stock	from stock
1 x 3/8	32	34		15	24	to order	to order
1 x 1/2	32	34		15	21	from stock	from stock
1 x 3/4	35	36		18	21	from stock	from stock
1 1/4 x 1/2	35	38		16	25	from stock	from stock
1 1/4 x 3/4	36	41		17	26	from stock	from stock
1 1/4 x 1	40	42		21	25	from stock	from stock
1 1/2 x 3/4	38	44		19	29	to order	from stock
1 1/2 x 1	42	46		23	29	to order	from stock
1 1/2 x 1 1/4	46	48		27	29	to order	from stock
2 x 1	44	52		20	35	to order	from stock
2 x 1 1/4	48	54		24	35	from stock	from stock
2 x 1 1/2	52	55		28	36	from stock	from stock
2 1/2 x 2	61	66		34	42	not made in this finish	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 92 Elbow 90°, equal (A4) · 24 sizes

Dimensional sketch of fitting No. 92 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 92 Elbow 90°, equal (A4): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	c	z	z1	black	galvanized
1/8	19	25		12		to order	from stock
1/4	21	28		11		from stock	from stock
3/8	25	32		15		from stock	from stock
1/2	28	37		15		from stock	from stock
3/4	33	43		18		from stock	from stock
1	38	52		21		from stock	from stock
1 1/4	45	60		26		from stock	from stock
1 1/2	50	65		31		from stock	from stock
2	58	74		34		from stock	from stock
2 1/2	69	88		42		from stock	from stock
3	78	98		48		to order	from stock
4	96	118		60		to order	from stock
1/2 x 3/8	26		33		13	from stock	from stock
3/4 x 1/2	30		40		15	from stock	from stock
1 x 1/2	32		46		15	from stock	from stock
1 x 3/4	35		46		18	from stock	from stock
1 1/4 x 3/4	44		51		17	not made in this finish	from stock
1 1/4 x 1	40		56		21	to order	from stock
1 1/2 x 1	47		62		28	from stock	from stock
1 1/2 x 1 1/4	52		64		33	from stock	from stock
3/8 x 1/2	28		37		18	to order	to order
1/2 x 3/4	34		42		21	from stock	to order
3/4 x 1	39		50		24	to order	from stock
1 x 1 1/4	44		59		27	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 94 Elbow 90° · 7 sizes

Dimensional sketch of fitting No. 94 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 94 Elbow 90°: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	b	black	galvanized
3/8	29	to order	to order
1/2	37	from stock	from stock
3/4	40	from stock	from stock
1	47	from stock	from stock
1 1/4	56	from stock	from stock
1 1/2	59	from stock	from stock
2	68	from stock	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 120 Elbow 45° (A1/45°) · 9 sizes

Dimensional sketch of fitting No. 120 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 120 Elbow 45° (A1/45°): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	z	black	galvanized
3/8	20	10	from stock	from stock
1/2	22	9	from stock	from stock
3/4	25	10	from stock	from stock
1	28	11	from stock	from stock
1 1/4	33	14	from stock	from stock
1 1/2	36	17	from stock	from stock
2	43	19	to order	from stock
2 1/2	48	21	to order	to order
3	54	24	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 121 Elbow 45° (A4/45°) · 9 sizes

Dimensional sketch of fitting No. 121 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 121 Elbow 45° (A4/45°): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	z	black	galvanized
3/8	20	26	10	to order	from stock
1/2	22	28	9	from stock	from stock
3/4	25	32	10	from stock	from stock
1	28	39	11	from stock	from stock
1 1/4	33	43	14	from stock	from stock
1 1/2	36	46	17	from stock	from stock
2	43	55	19	from stock	from stock
2 1/2	46	54	19	to order	to order
3	52	61	22	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

Tees and crosses

No. 130 Tee, equal (B1) · 117 sizes

Dimensional sketch of fitting No. 130 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 130 Tee, equal (B1): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	c	z	z1	z2	z3	black	galvanized
1/8	19			12				from stock	to order
1/4	21			11				from stock	from stock
3/8	25			15				from stock	from stock
1/2	28			15				from stock	from stock
3/4	33			18				from stock	from stock
1	38			21				from stock	from stock
1 1/4	45			26				from stock	from stock
1 1/2	50			31				from stock	from stock
2	58			34				from stock	from stock
2 1/2	69			42				from stock	from stock
3	78			48				from stock	from stock
4	96			60				from stock	from stock
3/8 x 1/4	23	23			13	13		to order	from stock
3/8 x 1/2	26	26			16	13		to order	from stock
1/2 x 1/4	24	24			11	14		from stock	from stock
1/2 x 3/8	26	26			13	16		from stock	from stock
1/2 x 3/4	31	30			18	15		from stock	from stock
1/2 x 1	34	32			21	15		from stock	from stock
3/4 x 1/4	26	27			11	17		from stock	from stock
3/4 x 3/8	28	28			13	18		to order	from stock
3/4 x 1/2	30	31			15	18		from stock	from stock
3/4 x 1	36	35			21	18		from stock	from stock
1 x 1/4	28	31			11	21		from stock	from stock
1 x 3/8	30	32			13	22		to order	from stock
1 x 1/2	32	34			15	21		from stock	from stock
1 x 3/4	35	36			18	21		from stock	from stock
1 x 1 1/4	42	40			25	21		to order	from stock
1 x 1 1/2	46	42			29	23		from stock	from stock
1 1/4 x 3/8	32	36			13	26		to order	to order
1 1/4 x 1/2	34	38			15	25		from stock	from stock
1 1/4 x 3/4	36	41			17	26		to order	from stock
1 1/4 x 1	40	42			21	25		from stock	from stock
1 1/4 x 1 1/2	48	46			29	27		to order	from stock
1 1/4 x 2	54	48			35	24		to order	to order
1 1/2 x 3/8	33	38			14	28		to order	from stock
1 1/2 x 1/2	36	42			17	29		from stock	from stock
1 1/2 x 3/4	38	44			19	29		from stock	from stock
1 1/2 x 1	42	46			23	29		from stock	from stock
1 1/2 x 1 1/4	46	48			27	29		to order	from stock
1 1/2 x 2	55	52			36	28		from stock	to order
2 x 1/2	38	48			14	35		from stock	from stock
2 x 3/4	40	50			16	35		from stock	from stock
2 x 1	44	52			20	35		from stock	from stock
2 x 1 1/4	48	54			24	35		from stock	from stock
2 x 1 1/2	52	55			28	36		to order	from stock
2 x 2 1/2	66	61			42	34		to order	to order
2 1/2 x 1/2	41	56			14	43		to order	from stock
2 1/2 x 3/4	45	58			18	44		to order	to order
2 1/2 x 1	47	60			20	43		to order	from stock
2 1/2 x 1 1/4	52	62			25	43		to order	from stock
2 1/2 x 1 1/2	55	63			28	44		to order	from stock
2 1/2 x 2	61	66			34	42		to order	from stock
3 x 1/2	46	63			15	50		available on request	from stock
3 x 3/4	48	66			18	51		available on request	to order
3 x 1	51	67			21	50		available on request	from stock
3 x 1 1/4	55	70			25	51		available on request	to order
3 x 1 1/2	58	71			28	52		available on request	to order
3 x 2	64	73			34	49		available on request	available on request
3 x 2 1/2	72	76			42	49		from stock	to order
4 x 1	56	80			20	63		available on request	to order
4 x 1 1/2	64	84			28	65		available on request	to order
4 x 2	70	86			34	62		available on request	to order
4 x 2 1/2	77	89			41	62		not made in this finish	to order
4 x 3	84	92			48	62		available on request	from stock
1/2 x 3/8 x 3/8	26	26	25		13	16	15	to order	from stock
1/2 x 1/2 x 3/8	28	28	26		15	15	16	to order	from stock
3/4 x 3/8 x 1/2	28	28	26		13	18	13	to order	to order
3/4 x 1/2 x 3/8	30	31	26		15	18	16	to order	to order
3/4 x 1/2 x 1/2	30	31	28		15	18	15	from stock	from stock
3/4 x 3/4 x 3/8	33	33	28		18	18	18	to order	from stock
3/4 x 3/4 x 1/2	33	33	31		18	18	18	from stock	from stock
3/4 x 1 x 1/2	36	35	34		21	18	21	to order	to order
1 x 1/2 x 1/2	32	34	28		15	21	15	to order	from stock
1 x 1/2 x 3/4	32	34	30		15	21	15	to order	from stock
1 x 3/4 x 1/2	35	36	31		18	21	18	from stock	from stock
1 x 3/4 x 3/4	35	36	33		18	21	18	from stock	from stock
1 x 1 x 3/8	38	38	32		21	21	22	to order	to order
1 x 1 x 1/2	38	38	34		21	21	21	from stock	from stock
1 x 1 x 3/4	38	38	36		21	21	21	from stock	from stock
1 x 1 1/4 x 3/4	42	40	41		25	21	26	to order	to order
1 1/4 x 1/2 x 1	34	38	32		15	25	15	to order	to order
1 1/4 x 3/4 x 3/4	36	41	33		17	26	18	to order	to order
1 1/4 x 3/4 x 1	36	41	35		17	26	18	to order	to order
1 1/4 x 1 x 3/4	40	42	36		21	25	21	to order	to order
1 1/4 x 1 x 1	40	42	38		21	25	21	to order	from stock
1 1/4 x 1 1/4 x 1/2	45	45	38		26	26	25	from stock	from stock
1 1/4 x 1 1/4 x 3/4	45	45	41		26	26	26	to order	from stock
1 1/4 x 1 1/4 x 1	45	45	42		26	26	25	to order	from stock
1 1/4 x 1 1/2 x 1	48	46	46		29	27	29	to order	to order
1 1/2 x 1/2 x 1 1/4	36	42	34		17	29	15	to order	from stock
1 1/2 x 3/4 x 1 1/4	38	44	36		19	29	17	to order	to order
1 1/2 x 1 x 1	42	46	38		23	29	21	to order	from stock
1 1/2 x 1 x 1 1/4	42	46	38		23	29	21	to order	from stock
1 1/2 x 1 1/4 x 1	46	48	42		27	29	25	to order	to order
1 1/2 x 1 1/4 x 1 1/4	46	48	45		27	29	26	to order	from stock
1 1/2 x 1 1/2 x 1/2	50	50	42		31	31	29	to order	from stock
1 1/2 x 1 1/2 x 3/4	50	50	44		31	31	29	from stock	from stock
1 1/2 x 1 1/2 x 1	50	50	46		31	31	29	to order	from stock
1 1/2 x 1 1/2 x 1 1/4	50	50	48		31	31	29	to order	to order
1 1/2 x 2 x 1 1/4	56	54	56		37	30	37	to order	to order
2 x 1/2 x 1 1/2	38	48	38		14	35	19	to order	from stock
2 x 3/4 x 1 1/2	40	50	38		16	35	19	to order	from stock
2 x 1 x 1 1/2	44	52	42		20	35	23	to order	from stock
2 x 1 1/4 x 1 1/4	48	54	45		24	35	26	to order	from stock
2 x 1 1/4 x 1 1/2	48	54	46		24	35	27	to order	to order
2 x 1 1/2 x 1 1/2	52	55	50		28	36	31	to order	to order
2 x 2 x 1/2	58	58	48		34	34	35	to order	from stock
2 x 2 x 3/4	58	58	50		34	34	35	to order	from stock
2 x 2 x 1	58	58	52		34	34	35	to order	from stock
2 x 2 x 1 1/4	58	58	54		34	34	35	to order	from stock
2 x 2 x 1 1/2	58	58	55		34	34	36	to order	from stock
2 1/2 x 2 x 2	67	72	62		40	48	38	to order	from stock
2 1/2 x 2 1/2 x 1	71	71	71		44	44	54	not made in this finish	from stock
2 1/2 x 2 1/2 x 1 1/2	69	69	64		42	42	45	available on request	from stock
2 1/2 x 2 1/2 x 2	73	73	68		46	46	34	available on request	to order
3 x 2 x 2	64	73	60		34	49	36	not made in this finish	to order
3 x 3 x 2	78	79	72		48	49	48	not made in this finish	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 131 Pitcher tee, equal (E1) · 30 sizes

Dimensional sketch of fitting No. 131 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 131 Pitcher tee, equal (E1): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	c	z	z1	z2	z3	black	galvanized
1/2	45		24	32			11	from stock	to order
3/4	50		28	35			13	to order	from stock
1	63		33	46			16	to order	from stock
1 1/4	76		40	57			21	to order	from stock
1 1/2	85		43	66			24	to order	from stock
2	102		53	78			29	to order	from stock
2 1/2	115		62	88			35	to order	to order
3	127		70	97			40	to order	from stock
4	165		87	129			51	to order	to order
3/4 x 1/2	47	48	25		32	35	10	to order	from stock
1 x 1/2	49	51	28		32	38	11	to order	from stock
1 x 3/4	53	54	30		36	39	13	to order	from stock
1 1/4 x 1/2	51	56	30		32	43	11	to order	to order
1 1/4 x 3/4	55	58	33		36	43	14	available on request	to order
1 1/4 x 1	66	68	36		47	51	17	to order	to order
1 1/2 x 1/2	52	58	29		33	45	10	available on request	to order
1 1/2 x 3/4	55	61	33		36	46	14	to order	to order
1 1/2 x 1	66	71	36		47	54	17	to order	to order
1 1/2 x 1 1/4	77	79	41		58	60	22	to order	to order
2 x 1/2	54	64	32		30	51	8	available on request	not made in this finish
2 x 3/4	69	75	39		45	60	15	to order	to order
2 x 1	70	77	40		46	60	16	to order	to order
2 x 1 1/4	80	85	45		56	66	21	to order	from stock
2 x 1 1/2	91	94	48		67	75	24	to order	from stock
2 1/2 x 1 1/4	103	108	58		76	89	31	not made in this finish	to order
3 x 2	138	143	69		108	119	39	to order	to order
3/4 x 1/2 x 1/2	47	48	24		31	34	11	to order	to order
3/4 x 3/4 x 1/2	49	49	27		34	34	14	to order	to order
1 x 1/2 x 3/4	49	51	25		32	38	10	available on request	available on request
1 x 3/4 x 3/4	53	54	28		36	39	13	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 132 Twin elbow, equal (E2) · 6 sizes

Dimensional sketch of fitting No. 132 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 132 Twin elbow, equal (E2): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	z	black	galvanized
1/2	45	32	to order	to order
3/4	50	35	to order	to order
1	63	46	to order	to order
1 1/4	76	57	to order	to order
1 1/2	85	66	to order	to order
2	102	78	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 133 Tee, equal · 4 sizes

Dimensional sketch of fitting No. 133 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 133 Tee, equal: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	z	black	galvanized
3/8	22	31	12	to order	from stock
1/2	25	38	12	from stock	from stock
3/4	33	45	18	from stock	from stock
1	39	53	22	from stock	from stock

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 134 Tee, reducing on branch · 11 sizes

Dimensional sketch of fitting No. 134 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 134 Tee, reducing on branch: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	c	z	z1	z3	black	galvanized
1/4	22	28		12			from stock	from stock
3/8	24	32		14			to order	from stock
1/2	27	37		14			from stock	from stock
3/4	33	43		17			to order	from stock
1	37	50		20			from stock	from stock
1 1/4	45	58		26			from stock	from stock
1 1/2	50	65		31			to order	from stock
2	59	69		35			from stock	from stock
1/2 x 1/4	24	34	24		11	14	to order	from stock
3/4 x 1/2	30	40	30		15	17	to order	from stock
1 x 1/2	32	44	35		15	22	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 135 Tee, equal · 3 sizes

Dimensional sketch of fitting No. 135 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 135 Tee, equal: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	b	black	galvanized
1/2	37	from stock	from stock
3/4	43	to order	from stock
1	48	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 137 Distribution Tee reducing on branch · 3 sizes

Dimensional sketch of fitting No. 137 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 137 Distribution Tee reducing on branch: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	z	black	galvanized
1 1/4 x 3/4	35	85	16	not made in this finish	to order
1 1/4 x 1	35	75	16	not made in this finish	to order
1 1/2 x 1	40	86	21	not made in this finish	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 165 Tee 45°, equal · 7 sizes

Dimensional sketch of fitting No. 165 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 165 Tee 45°, equal: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	c	z1	z2	z3	black	galvanized
3/8	16	46	46	6	36	36	to order	not made in this finish
1/2	23	54	54	10	41	41	to order	from stock
3/4	24	64	64	9	49	49	from stock	from stock
1	28	77	77	11	60	60	to order	from stock
1 1/4	34	91	91	14	72	72	to order	to order
1 1/2	34	98	98	15	79	79	to order	from stock
2	39	115	115	15	91	91	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 180 Cross, equal (C1) · 17 sizes

Dimensional sketch of fitting No. 180 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 180 Cross, equal (C1): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	z	z1	z2	black	galvanized
1/4	21		11			to order	from stock
3/8	25		15			to order	from stock
1/2	28		15			from stock	from stock
3/4	33		18			from stock	from stock
1	38		21			from stock	from stock
1 1/4	45		26			from stock	from stock
1 1/2	50		31			to order	from stock
2	58		34			from stock	from stock
2 1/2	69		42			to order	from stock
3	78		48			to order	to order
4	96		60			available on request	from stock
	Dimensions on request					available on request	available on request
1 x 1/2	32	34		15	21	to order	to order
1 x 3/4	35	36		18	21	to order	from stock
1 1/4 x 1	40	42		21	25	to order	to order
1 1/2 x 1	42	46		23	29	to order	from stock
2 x 1	44	52		20	35	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

Manifolds

No. 220 Y-piece · 4 sizes

Dimensional sketch of fitting No. 220 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 220 Y-piece: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	z	black	galvanized
3/8	24	14	to order	to order
1/2	27	14	to order	from stock
3/4	33	18	from stock	from stock
1	40	23	from stock	from stock

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 221 Side outlet elbow (Za1) · 7 sizes

Dimensional sketch of fitting No. 221 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 221 Side outlet elbow (Za1): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	z	black	galvanized
3/8	25	15	to order	from stock
1/2	28	15	from stock	to order
3/4	33	18	from stock	from stock
1	38	21	from stock	to order
1 1/4	45	26	to order	from stock
1 1/2	50	31	to order	from stock
2	58	34	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: galvanized

↑ Back to the type selection

No. 223 Side outlet tee (Za2) · 3 sizes

Dimensional sketch of fitting No. 223 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 223 Side outlet tee (Za2): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	z	black	galvanized
1/2	28	15	to order	to order
3/4	33	18	from stock	to order
1	38	21	from stock	from stock

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

Sockets and bushes

No. 240 Socket, reducing (M2) · 33 sizes

Dimensional sketch of fitting No. 240 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 240 Socket, reducing (M2): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	z2	black	galvanized
1/4 x 1/8	27	17	10	from stock	from stock
3/8 x 1/8	30	22	13	to order	from stock
3/8 x 1/4	30	22	10	from stock	from stock
1/2 x 1/4	36		13	from stock	from stock
1/2 x 3/8	36		13	from stock	from stock
3/4 x 1/4	39		14	from stock	from stock
3/4 x 3/8	39		14	from stock	from stock
3/4 x 1/2	39		11	from stock	from stock
1 x 3/8	45		18	from stock	from stock
1 x 1/2	45		15	from stock	from stock
1 x 3/4	45		13	from stock	from stock
1 1/4 x 3/8	50		21	to order	from stock
1 1/4 x 1/2	50		18	from stock	from stock
1 1/4 x 3/4	50		16	from stock	from stock
1 1/4 x 1	50		14	from stock	from stock
1 1/2 x 1/2	55		23	from stock	from stock
1 1/2 x 3/4	55		21	from stock	from stock
1 1/2 x 1	55		19	from stock	from stock
1 1/2 x 1 1/4	55		17	from stock	from stock
2 x 1/2	65		28	from stock	from stock
2 x 3/4	65		26	from stock	from stock
2 x 1	65		24	from stock	from stock
2 x 1 1/4	65		22	from stock	from stock
2 x 1 1/2	65		22	from stock	from stock
2 1/2 x 1	74		30	from stock	from stock
2 1/2 x 1 1/2	74		28	to order	from stock
2 1/2 x 2	74		23	to order	from stock
3 x 1 1/2	80		31	to order	from stock
3 x 2	80		26	from stock	to order
3 x 2 1/2	80		23	to order	to order
4 x 2	94		34	to order	to order
4 x 2 1/2	94		31	to order	from stock
4 x 3	94		28	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 241 Reducing bush (N4) · 39 sizes

Dimensional sketch of fitting No. 241 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 241 Reducing bush (N4): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	s	z	black	galvanized
1/4 x 1/8 (form I)	20		17	13	from stock	from stock
3/8 x 1/8 (form I)	20		19	13	from stock	from stock
3/8 x 1/4 (form I)	20		19	10	from stock	from stock
1/2 x 1/8 (form II)	24		23	17	from stock	from stock
1/2 x 1/4 (form II)	24		23	14	from stock	from stock
1/2 x 3/8 (form I)	24		23	14	from stock	from stock
3/4 x 1/4 (form II)	26		30	16	from stock	from stock
3/4 x 3/8 (form II)	27		30	16	from stock	from stock
3/4 x 1/2 (form I)	26		30	13	from stock	from stock
1 x 1/4 (form II)	29		36	19	from stock	from stock
1 x 3/8 (form II)	29		36	19	from stock	from stock
1 x 1/2 (form II)	29		36	16	from stock	from stock
1 x 3/4 (form I)	30		36	15	from stock	from stock
II	31		46	21	available on request	available on request
1 1/4 x 1/2 (form II)	31		46	18	from stock	from stock
1 1/4 x 3/4 (form II)	31		46	16	from stock	from stock
1 1/4 x 1 (form II)	31		46	14	from stock	from stock
1 1/2 x 3/8 (form II)	31		50	21	from stock	from stock
1 1/2 x 1/2 (form II)	31		50	18	from stock	from stock
1 1/2 x 3/4 (form II)	31		50	16	from stock	from stock
1 1/2 x 1 (form II)	31		50	14	from stock	from stock
I	33		50	12	available on request	available on request
2 x 1/2 (form III)	35	48	65	35	from stock	from stock
2 x 3/4 (form III)	35	49	65	34	from stock	from stock
2 x 1 (form II)	37		65	20	from stock	from stock
2 x 1 1/4 (form II)	37		65	18	from stock	from stock
2 x 1 1/2 (form II)	37		65	18	from stock	from stock
2 1/2 x 1 (form III)	44	54	80	37	from stock	from stock
III	40	54	80	37	available on request	available on request
2 1/2 x 1 1/2 (form II)	42		80	23	from stock	from stock
2 1/2 x 2 (form II)	40		80	16	from stock	from stock
3 x 1 (form III)	44	59	95	42	to order	to order
3 x 1 1/4 (form III)	44	59	95	40	from stock	from stock
3 x 1 1/2 (form III)	44	59	95	40	from stock	from stock
3 x 2 (form II)	44		95	20	from stock	from stock
3 x 2 1/2 (form II)	44		96	17	to order	from stock
4 x 2 (form III)	51	69	120	45	to order	from stock
4 x 2 1/2 (form III)	51	69	120	42	from stock	from stock
4 x 3 (form II)	53		120	23	from stock	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 245 Hexagon nipple, reducing (N8) · 24 sizes

Dimensional sketch of fitting No. 245 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 245 Hexagon nipple, reducing (N8): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	black	galvanized
1/4 x 1/8	35	17	to order	from stock
3/8 x 1/8	34	19	from stock	from stock
3/8 x 1/4	38	19	from stock	from stock
1/2 x 1/4	44	27	from stock	from stock
1/2 x 3/8	44	22	from stock	from stock
3/4 x 1/4	43	30	to order	from stock
3/4 x 3/8	47	30	from stock	from stock
3/4 x 1/2	47	31	from stock	from stock
1 x 1/2	53	36	from stock	from stock
1 x 3/4	53	36	from stock	from stock
1 1/4 x 1/2	57	46	from stock	from stock
1 1/4 x 3/4	57	46	from stock	from stock
1 1/4 x 1	57	46	from stock	from stock
1 1/2 x 3/4	59	50	from stock	from stock
1 1/2 x 1	59	50	from stock	from stock
1 1/2 x 1 1/4	59	50	from stock	from stock
2 x 1	68	65	from stock	from stock
2 x 1 1/4	68	65	from stock	from stock
2 x 1 1/2	68	65	from stock	from stock
2 1/2 x 1 1/2	75	80	from stock	from stock
2 1/2 x 2	75	80	from stock	from stock
3 x 2	83	95	from stock	to order
3 x 2 1/2	83	95	to order	from stock
4 x 3	96	120	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 246 Socket, reducing (M4) · 21 sizes

Dimensional sketch of fitting No. 246 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 246 Socket, reducing (M4): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	z	black	galvanized
1/4 x 1/8	32	17	22	from stock	from stock
3/8 x 1/4	35	22	25	to order	from stock
1/2 x 1/4	43		30	from stock	from stock
1/2 x 3/8	43		30	from stock	from stock
3/4 x 3/8	48		33	to order	from stock
3/4 x 1/2	48		33	from stock	from stock
1 x 1/2	55		38	from stock	from stock
1 x 3/4	55		38	from stock	from stock
1 1/4 x 1/2	60		41	from stock	from stock
1 1/4 x 3/4	60		41	from stock	from stock
1 1/4 x 1	60		41	from stock	from stock
1 1/2 x 3/4	60		41	to order	from stock
1 1/2 x 1	63		44	to order	from stock
1 1/2 x 1 1/4	63		44	from stock	from stock
2 x 1	70		46	from stock	from stock
2 x 1 1/4	70		46	to order	from stock
2 x 1 1/2	70		46	from stock	from stock
2 1/2 x 1 1/2	83		56	to order	from stock
2 1/2 x 2	80		53	from stock	from stock
3 x 2	87		57	to order	from stock
3 x 2 1/2	91		61	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 260 Socket eccentric, reducing · 15 sizes

Dimensional sketch of fitting No. 260 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 260 Socket eccentric, reducing: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	m	z	black	galvanized
3/4 x 1/2	41	3	13	to order	to order
1 x 1/2	45	6	15	to order	to order
1 x 3/4	45	3.5	13	to order	to order
1 1/4 x 1/2	50	11	18	to order	to order
1 1/4 x 3/4	50	8	16	to order	to order
1 1/4 x 1	50	5	14	to order	to order
1 1/2 x 1/2	56	14	24	to order	to order
1 1/2 x 3/4	56	11	22	to order	to order
1 1/2 x 1	56	8	20	to order	to order
1 1/2 x 1 1/4	56	3	18	to order	to order
2 x 1/2	65	20	28	to order	to order
2 x 1	65	14	24	to order	to order
2 x 1 1/4	65	10	22	to order	to order
2 x 1 1/2	65	7	22	to order	to order
2 1/2 x 2	74	8	23	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 270 Socket (M2) · 12 sizes

Dimensional sketch of fitting No. 270 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 270 Socket (M2): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	z1	black	galvanized
1/8	25	17	11	from stock	from stock
1/4	27	19	7	from stock	from stock
3/8	30		10	from stock	from stock
1/2	36		10	from stock	from stock
3/4	39		9	from stock	from stock
1	45		11	from stock	from stock
1 1/4	50		12	from stock	from stock
1 1/2	55		17	from stock	from stock
2	65		17	from stock	from stock
2 1/2	74		20	from stock	from stock
3	80		20	from stock	from stock
4	94		22	from stock	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 271 Socket, right and left hand thread (M2 R-L) · 7 sizes

Dimensional sketch of fitting No. 271 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 271 Socket, right and left hand thread (M2 R-L): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	z1	black	galvanized
3/8	30	10	to order	to order
1/2	36	10	to order	from stock
3/4	39	9	to order	from stock
1	45	11	to order	from stock
1 1/4	50	12	to order	to order
1 1/2	55	17	to order	to order
2	65	17	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: galvanized

↑ Back to the type selection

No. 529a Socket, internal and external thread (M4) · 8 sizes

Dimensional sketch of fitting No. 529a with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 529a Socket, internal and external thread (M4): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	z	black	galvanized
1/4	28	17	18	from stock	from stock
3/8	35	22	25	from stock	from stock
1/2	43		30	from stock	from stock
3/4	48		33	from stock	from stock
1	55		38	from stock	from stock
1 1/4	60		41	to order	from stock
1 1/2	63		44	to order	from stock
2	70		46	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 536 Longscrew socket · 6 sizes

Dimensional sketch of fitting No. 536 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 536 Longscrew socket: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	black	galvanized
1/2 80	50	80	not made in this finish	available on request
3/4 90	57	90	not made in this finish	available on request
1 100	Dimensions on request		not made in this finish	available on request
1 1/4 116	Dimensions on request		not made in this finish	available on request
1 1/2 125	Dimensions on request		not made in this finish	available on request
2 143	Dimensions on request		not made in this finish	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 537 Longscrew socket, complete · 6 sizes

Dimensional sketch of fitting No. 537 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 537 Longscrew socket, complete: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	s	black	galvanized
1/2	50	80	32	not made in this finish	to order
3/4	57	90	36	not made in this finish	to order
1	65	100	46	not made in this finish	to order
1 1/4	75	116	55	not made in this finish	to order
1 1/2	84	125	60	not made in this finish	to order
2	98	143	73	not made in this finish	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 599a Regulation socket · 6 sizes

Dimensional sketch of fitting No. 599a with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 599a Regulation socket: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	s	z	black	galvanized
× 2/8	Dimensions on request				available on request	available on request
× 4/2	Dimensions on request				available on request	available on request
	Dimensions on request				available on request	available on request
1 1/4 × 1 1/8	45	81	17	26	available on request	available on request
1 1/2 × 1 1/4	47	77	22	28	available on request	not made in this finish
2 × 1 3/4	57	99	27	33	available on request	not made in this finish

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

Nipples

No. 280 Hexagon nipple (N8) · 12 sizes

Dimensional sketch of fitting No. 280 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 280 Hexagon nipple (N8): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	black	galvanized
1/8	29	17	from stock	from stock
1/4	36	19	from stock	from stock
3/8	38	22	from stock	from stock
1/2	44	28	from stock	from stock
3/4	47	33	from stock	from stock
1	53	42	from stock	from stock
1 1/4	57	50	from stock	from stock
1 1/2	61	55	from stock	from stock
2	69	70	from stock	from stock
2 1/2	79	85	from stock	from stock
3	83	100	from stock	from stock
4	95	131	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 281 Hexagon nipple, right and left hand thread (N8 R-L) · 7 sizes

Dimensional sketch of fitting No. 281 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 281 Hexagon nipple, right and left hand thread (N8 R-L): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	black	galvanized
3/8	38	22	not made in this finish	to order
1/2	44	28	from stock	from stock
3/4	47	33	from stock	from stock
1	53	42	to order	to order
1 1/4	57	50	to order	to order
1 1/2	59	55	to order	to order
2	68	70	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 534 Longscrew hexagon nipple · 3 sizes

Dimensional sketch of fitting No. 534 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 534 Longscrew hexagon nipple: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	s	black	galvanized
1/2	46	77	32	not made in this finish	from stock
3/4	49	82	36	not made in this finish	from stock
1	56	92	46	not made in this finish	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: galvanized

↑ Back to the type selection

No. 535 Longscrew hexagon nipple, complete · 3 sizes

Dimensional sketch of fitting No. 535 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 535 Longscrew hexagon nipple, complete: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	s	black	galvanized
1/2	46	77	32	not made in this finish	to order
3/4	49	82	36	not made in this finish	to order
1	56	92	46	not made in this finish	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

Plugs and caps

No. 290 Plug, beaded (T9) · 12 sizes

Dimensional sketch of fitting No. 290 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 290 Plug, beaded (T9): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	c	s	black	galvanized
1/8	20	7	from stock	from stock
1/4	24	8	from stock	from stock
3/8	28	10	from stock	from stock
1/2	32	11	from stock	from stock
3/4	37	17	from stock	from stock
1	41	19	from stock	from stock
1 1/4	47	22	from stock	from stock
1 1/2	47	22	from stock	from stock
2	54	27	from stock	from stock
2 1/2	64	32	from stock	from stock
3	71	36	from stock	from stock
4	81	41	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 291 Plug, plain (T8) · 12 sizes

Dimensional sketch of fitting No. 291 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 291 Plug, plain (T8): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	b	s	black	galvanized
1/8	16	7	to order	from stock
1/4	18	8	to order	from stock
3/8	20	10	to order	from stock
1/2	24	11	to order	from stock
3/4	26	17	to order	from stock
1	33	19	to order	from stock
1 1/4	36	22	from stock	to order
1 1/2	37	22	from stock	from stock
2	44	27	from stock	from stock
2 1/2	52	32	to order	from stock
3	59	36	to order	to order
4	66	41	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 291a Plug, plain, solid · 5 sizes

Dimensional sketch of fitting No. 291a with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 291a Plug, plain, solid: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	b	s	black	galvanized
3/4	28	17	to order	to order
1	33	19	to order	to order
1 1/4	36	22	to order	to order
1 1/2	38	23	from stock	to order
2	44	27	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 294 Plug, with hole in square head · 6 sizes

Dimensional sketch of fitting No. 294 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 294 Plug, with hole in square head: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	c	d	s	black	galvanized
1/2	32	4	11	to order	to order
3/4	37	4	17	to order	to order
1	41	5	19	to order	from stock
1 1/4	47	5	22	to order	to order
1 1/2	47	5	22	to order	to order
2	54	5	27	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: galvanized

↑ Back to the type selection

No. 300 Cap (T1) · 12 sizes

Dimensional sketch of fitting No. 300 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 300 Cap (T1): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	black	galvanized
1/8	14	14	from stock	from stock
1/4	17	17	from stock	from stock
3/8	18	22	from stock	from stock
1/2	24	26	from stock	from stock
3/4	26	32	from stock	from stock
1	29	38	from stock	from stock
1 1/4	34	47	from stock	from stock
1 1/2	34	53	from stock	from stock
2	39	68	from stock	from stock
2 1/2	44	86	from stock	from stock
3	50	96	to order	from stock
4	54	128	from stock	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 595 Plug with one machined face · 3 sizes

Dimensional sketch of fitting No. 595 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 595 Plug with one machined face: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	black	galvanized
1/2	from stock	to order
3/4	to order	from stock
1	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 596 Plug, hexagon/square inside (T11) · 9 sizes

Dimensional sketch of fitting No. 596 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 596 Plug, hexagon/square inside (T11): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	d	s	black	galvanized
1/8	8	5	to order	to order
1/4	10	7	to order	to order
3/8	10	8	to order	to order
1/2	15	10	to order	from stock
3/4	17	12	to order	from stock
1	19	16	to order	from stock
1 1/4	22	22	from stock	from stock
1 1/2	22	22	from stock	from stock
2	27	27	to order	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: galvanized

↑ Back to the type selection

Backnuts and flanges

No. 310 Backnut (P4) · 11 sizes

Dimensional sketch of fitting No. 310 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 310 Backnut (P4): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	black	galvanized
1/8	7	19	to order	from stock
1/4	7.5	22	from stock	from stock
3/8	8	27	from stock	from stock
1/2	9	32	from stock	from stock
3/4	10	36	from stock	from stock
1	12	46	from stock	from stock
1 1/4	13	56	from stock	from stock
1 1/2	14	60	from stock	from stock
2	16	73	from stock	from stock
2 1/2	19	95	from stock	from stock
3	22	105	from stock	from stock

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 310a Backnut, with one machined face (P4) · 6 sizes

Dimensional sketch of fitting No. 310a with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 310a Backnut, with one machined face (P4): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	black	galvanized
1/2	8.5	32	to order	to order
3/4	9.5	36	to order	to order
1	11.5	46	to order	to order
1 1/4	12.5	56	to order	from stock
1 1/2	13.5	60	to order	to order
2	15.5	73	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: galvanized

↑ Back to the type selection

No. 310b Backnut, strongly faced on one end (P4) · 6 sizes

Dimensional sketch of fitting No. 310b with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 310b Backnut, strongly faced on one end (P4): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	black	galvanized
1/2	9	32	not made in this finish	to order
3/4	10	36	not made in this finish	to order
1	11.5	46	not made in this finish	to order
1 1/4	13	56	not made in this finish	to order
1 1/2	14	60	not made in this finish	to order
2	16	73	not made in this finish	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 312 Backnut, recessed (P4) · 8 sizes

Dimensional sketch of fitting No. 312 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 312 Backnut, recessed (P4): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	black	galvanized
1/4	7.5	22	to order	to order
3/8	8	27	to order	to order
1/2	9	32	to order	to order
3/4	10	37	to order	to order
1	12	46	to order	to order
1 1/4	13	55	to order	to order
1 1/2	14	60	to order	to order
2	16	73	to order	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 321 Screwed flange, undrilled · 6 sizes

Dimensional sketch of fitting No. 321 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 321 Screwed flange, undrilled: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	black	galvanized
1/2 PN 1	available on request	available on request
3/4 PN 1	available on request	available on request
1 PN 1	available on request	available on request
1 1/4 PN 1	available on request	available on request
1 1/2 PN 1	available on request	available on request
2 PN 1	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 326 Screwed flange, drilled, 2 holes · 6 sizes

Dimensional sketch of fitting No. 326 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 326 Screwed flange, drilled, 2 holes: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	black	galvanized
1/2 PN 10	available on request	available on request
3/4 PN 10	available on request	available on request
1 PN 10	available on request	available on request
1 1/4 PN 10	available on request	available on request
1 1/2 PN 10	available on request	available on request
2 PN 10	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 329 Screwed flange, drilled, 4 holes · 10 sizes

Dimensional sketch of fitting No. 329 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 329 Screwed flange, drilled, 4 holes: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	black	galvanized
1/2 PN 16	available on request	available on request
3/4 PN 16	available on request	available on request
1 PN 16	available on request	available on request
1 1/4 PN 16	available on request	available on request
1 1/2 PN 16	available on request	available on request
2 PN 16	available on request	available on request
2 1/2 PN 16	available on request	available on request
3 PN 10	available on request	available on request
*- 3 PN 16	available on request	available on request
*- 4 PN 16	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 933 Water meter bend · 3 sizes

Picture and dimensional sketch: Georg Fischer

No. 933 Water meter bend: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	black	galvanized
3/4	not made in this finish	available on request
1	not made in this finish	available on request
1 1/4	not made in this finish	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 933a Counter flange to fig. 933 · 0 sizes

Dimensional sketch of fitting No. 933a with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

For this number the current range lists no sizes – please ask us.

↑ Back to the type selection

Unions

No. 95 Union elbow, flat seat (UA1) · 13 sizes

Dimensional sketch of fitting No. 95 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 95 Union elbow, flat seat (UA1): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	c	s1	s2	z	z1	z2	black	galvanized
3/8 × 3/4	52	25	12	32		15	42	available on request	available on request
1/2 × 1	58	28	26	41		15	45	available on request	available on request
3/4 × 1 1/4	62	33	31	48		18	47	available on request	available on request
1 × 1 1/2	72	38	38	55		21	55	available on request	available on request
1 1/4 × 2	82	45	48	67		26	63	available on request	available on request
1 1/2 × 2 1/4	90	50	54	74		31	71	available on request	available on request
2 × 2 3/4	100	58	67	90		34	76	available on request	available on request
1/8 × /4	28				15			available on request	available on request
3/4 × 1 1/4	33				18			available on request	available on request
1 × 1 1/2	38				21			available on request	available on request
1 1/4 × 2	45				26			available on request	available on request
1 1/2 × 2 1/4	50				31			available on request	available on request
2 × 2 3/4	58				34			available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 96 Union elbow, taper seat (UA11) · 10 sizes

Dimensional sketch of fitting No. 96 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 96 Union elbow, taper seat (UA11): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	c	s1	s2	z1	z2	black	galvanized
1/4 × 5/8	48	21	10	28	11	38	available on request	available on request
3/8 × 3/4	52	25	12	32	15	42	available on request	available on request
1/2 × 1	58	28	25	41	15	45	available on request	available on request
3/4 × 1 1/4	62	33	32	48	18	47	available on request	available on request
1 × 1 1/2	72	38	38	55	21	55	available on request	available on request
1 1/4 × 2	82	45	48	67	26	63	available on request	available on request
1 1/2 × 2 1/4	90	50	54	74	31	71	available on request	available on request
2 × 2 3/4	100	58	66	90	34	76	available on request	available on request
2 1/2 × 3 1/2	130	72	85	111	45	103	available on request	available on request
3 × 4	134	79	96	131	49	104	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 97 Union elbow, flat seat (UA2) · 7 sizes

Dimensional sketch of fitting No. 97 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 97 Union elbow, flat seat (UA2): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	b	c	s1	s2	z1	black	galvanized
3/8 × 3/4	65	25	19	32	15	available on request	available on request
1/2 × 1	79	28	23	41	15	available on request	available on request
3/4 × 1 1/4	82	33	30	48	18	available on request	available on request
1 × 1 1/2	93	38	36	55	21	available on request	available on request
1 1/4 × 2	107	45	48	67	26	available on request	available on request
1 1/2 × 2 1/4	115	50	54	74	31	available on request	available on request
2 × 2 3/4	128	58	66	90	34	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 98 Union elbow, taper seat (UA12) · 10 sizes

Dimensional sketch of fitting No. 98 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 98 Union elbow, taper seat (UA12): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	b	c	s1	s2	z1	black	galvanized
1/4 × 5/8	61	21	15	28	11	available on request	available on request
3/8 × 3/4	65	25	20	32	15	available on request	available on request
1/2 × 1	76	28	25	41	15	available on request	available on request
3/4 × 1 1/4	82	33	32	48	18	available on request	available on request
1 × 1 1/2	94	38	38	55	21	available on request	available on request
1 1/4 × 2	107	45	48	67	26	available on request	available on request
1 1/2 × 2 1/4	115	50	54	74	31	available on request	available on request
2 × 2 3/4	128	58	67	90	34	available on request	available on request
2 1/2 × 3 1/2	164	72	85	111	45	available on request	available on request
3 × 4	167	79	95	131	49	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 100 Union elbow, flat seat · 6 sizes

Dimensional sketch of fitting No. 100 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 100 Union elbow, flat seat: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	s1	s2	z	black	galvanized
1/2 × 1	58	39	26	41	45	available on request	available on request
3/4 × 1 1/4	61	43	31	48	46	available on request	available on request
1 × 1 1/2	71	52	38	55	55	available on request	available on request
1	39					to order	to order
1 1/4	43					available on request	available on request
1 × 1 1/2	52					available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 101 Union elbow, flat seat · 3 sizes

Dimensional sketch of fitting No. 101 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 101 Union elbow, flat seat: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	c	s1	s2	black	galvanized
1/2 × 1	77	39	40	23	41	available on request	available on request
3/4 × 1 1/4	81	43	42	30	48	available on request	available on request
1 × 1 1/2	93	52	47	36	55	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 102 Union elbow, taper seat · 6 sizes

Dimensional sketch of fitting No. 102 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 102 Union elbow, taper seat: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	s1	s2	z	black	galvanized
1/2 × 1	59	39	25	41	46	available on request	available on request
3/4 × 1 1/4	61	43	32	48	46	available on request	available on request
1 × 1 1/2	71	52	38	55	54	available on request	available on request
1	39					available on request	not made in this finish
1 1/4	43					available on request	not made in this finish
1 × 1 1/2	52					available on request	not made in this finish

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 103 Union elbow, taper seat · 3 sizes

Dimensional sketch of fitting No. 103 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 103 Union elbow, taper seat: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	c	s1	s2	black	galvanized
1/2 × 1	76	39	40.5	25	39	available on request	available on request
3/4 × 1 1/4	81	43	42.5	32	48	available on request	available on request
1 × 1 1/2	93	52	47.5	38	55	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 330 Union flat seat (U1) · 11 sizes

Dimensional sketch of fitting No. 330 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 330 Union flat seat (U1): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s1	s2	s3	z1	black	galvanized
1/4 × 5/8	42	19	28	10	22	available on request	available on request
3/8 × 3/4	47	22	32	12	27	available on request	available on request
1/2 × 1	48	26	41	26	22	available on request	available on request
3/4 × 1 1/4	52	31	48	31	22	available on request	available on request
1 × 1 1/2	59	38	55	38	25	available on request	available on request
1 1/4 × 2	65	48	67	48	27	available on request	available on request
1 1/2 × 2 1/4	70	54	74	54	32	available on request	available on request
2 × 2 3/4	80	66	90	66	32	available on request	available on request
2 1/2 × 3 1/2	85	85	111	85	31	available on request	available on request
3 × 4	96	96	130	96	36	available on request	available on request
4 × 5	111	120	151	122	39	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 331 Union flat seat (U2) · 10 sizes

Dimensional sketch of fitting No. 331 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 331 Union flat seat (U2): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	b	s1	s2	s3	z2	black	galvanized
1/4 × 5/8	55	19	28	15	45	available on request	available on request
3/8 × 3/4	58	22	32	19	48	available on request	available on request
1/2 × 1	66	26	41	23	53	available on request	available on request
3/4 × 1 1/4	72	31	48	30	57	available on request	available on request
1 × 1 1/2	80	38	55	36	63	available on request	available on request
1 1/4 × 2	90	48	67	48	71	available on request	available on request
1 1/2 × 2 1/4	95	54	74	54	76	available on request	available on request
2 × 2 3/4	107	66	90	66	83	available on request	available on request
2 1/2 × 3 1/2	118	85	111	85	91	available on request	available on request
3 × 4	131	96	130	95	101	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 332 Union flat seat · 3 sizes

Dimensional sketch of fitting No. 332 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 332 Union flat seat: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	black	galvanized
3/4 × 1 1/4	available on request	available on request
1 × 1 1/2	available on request	available on request
1 1/4 × 2	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 335 Union flat seat · 5 sizes

Dimensional sketch of fitting No. 335 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 335 Union flat seat: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	c	s1	s2	s3	z2	black	galvanized
1/2 × 1	66	26	41	26	53	available on request	available on request
3/4 × 1 1/4	72	32	48	31	57	available on request	available on request
1 × 1 1/2	82	38	55	38	65	available on request	available on request
1 1/4 × 2	90	48	67	48	71	available on request	available on request
1 1/2 × 2 1/4	95	54	74	54	76	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 336 Union flat seat · 5 sizes

Picture and dimensional sketch: Georg Fischer

No. 336 Union flat seat: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	c	s1	s2	s3	black	galvanized
1/2 × 1	43	40	85	26	41	23	available on request	available on request
3/4 × 1 1/4	48	42	92	32	48	30	available on request	available on request
1 × 1 1/2	54	47	103	38	55	36	available on request	available on request
1 1/4 × 2	57	55	114	48	67	48	available on request	available on request
1 1/2 × 2 1/4	61	57	120	54	74	54	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 338 Distribution union flat seat · 3 sizes

Dimensional sketch of fitting No. 338 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 338 Distribution union flat seat: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	b	b2	s1	s2	z2	black	galvanized
3/4 × 1 1/4	177	74	31	48	160	not made in this finish	available on request
1 × 1 1/2	174	67	38	55	155	not made in this finish	available on request
1 1/4 × 2	174	59	48	67	153	not made in this finish	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 340 Union taper seat (U11) · 13 sizes

Dimensional sketch of fitting No. 340 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 340 Union taper seat (U11): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s1	s2	s3	z1	black	galvanized
1/8 × 1/2	38	15	26	15	24	available on request	available on request
1/4 × 5/8	42	19	28	10	22	available on request	available on request
3/8 × 3/4	48	22	32	12	28	available on request	available on request
1/2 × 1	48	26	41	25	22	available on request	available on request
1/2 × s	48	26	44	26	22	available on request	available on request
3/4 × 1 1/4	52	31	48	32	22	available on request	available on request
1 × 1 1/2	58	38	55	38	24	available on request	available on request
1 1/4 × 2	65	48	67	48	27	available on request	available on request
1 1/2 × 2 1/4	70	54	74	54	32	available on request	available on request
2 × 2 3/4	78	66	90	66	30	available on request	available on request
2 1/2 × 3 1/2	90	85	111	85	36	available on request	available on request
3 × 4	101	96	130	96	41	available on request	available on request
4 × 5	114	120	151	120	42	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black

↑ Back to the type selection

No. 341 Union taper seat (U12) · 11 sizes

Dimensional sketch of fitting No. 341 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 341 Union taper seat (U12): sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	b	s1	s2	s3	z2	black	galvanized
1/4 × 5/8	55	19	28	15	45	available on request	available on request
3/8 × 3/4	59	22	32	20	49	available on request	available on request
1/2 × 1	66	26	41	23	53	available on request	available on request
3/4 × 1 1/4	72	31	48	30	57	available on request	available on request
1 × 1 1/2	80	38	55	36	63	available on request	available on request
1 1/4 × 2	90	48	67	48	71	available on request	available on request
1 1/2 × 2 1/4	96	54	74	54	77	available on request	available on request
2 × 2 3/4	106	66	90	66	82	available on request	available on request
2 1/2 × 3 1/2	122	85	111	85	95	available on request	available on request
3 × 4	134	96	130	95	104	available on request	available on request
4 × 5	153	120	151	120	117	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 344 Union taper seat · 8 sizes

Dimensional sketch of fitting No. 344 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 344 Union taper seat: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	b	s1	s2	s3	black	galvanized
1/4 × 5/8	69	18	28	15	available on request	available on request
3/8 × 3/4	75	22	32	20	available on request	available on request
1/2 × 1	85	26	39	23	available on request	available on request
3/4 × 1 1/4	93	32	48	30	available on request	available on request
1 × 1 1/2	103	38	55	36	available on request	available on request
1 1/4 × 2	114	48	67	48	available on request	available on request
1 1/2 × 2 1/4	123	54	74	54	available on request	available on request
2 × 2 3/4	136	66	90	67	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: black · galvanized

↑ Back to the type selection

No. 370 Union bush flat seat · 9 sizes

Dimensional sketch of fitting No. 370 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 370 Union bush flat seat: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	z	black	galvanized
1/2 × 1	25	26	12	available on request	available on request
1/2 × s	25	26	12	available on request	available on request
3/4 × 1 1/4	28	32	13	available on request	available on request
1 × 1 1/2	31	38	14	available on request	available on request
1 1/4 × 2	33	48	14	available on request	available on request
1 1/2 × 2 1/4	36	54	17	available on request	available on request
2 × 2 3/4	42	66	18	available on request	available on request
2 1/2 × 3 1/2	41	85	14	available on request	available on request
3 × 4	48	96	18	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 371 Union end flat seat, equal · 9 sizes

Dimensional sketch of fitting No. 371 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 371 Union end flat seat, equal: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	black	galvanized
1/8 × 3/2	available on request	available on request
3/4 × 1 1/4	available on request	available on request
1 × 1 1/2	available on request	available on request
1 1/4 × 2	available on request	available on request
1 1/2 × 2 1/4	available on request	available on request
2 × 2 3/4	available on request	available on request
2 1/2 × 3 1/2	available on request	available on request
3 × 4	available on request	available on request
1 x 1 1/4 × 1 1/2	available on request	not made in this finish

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 372 Union end flat seat, equal · 12 sizes

Dimensional sketch of fitting No. 372 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 372 Union end flat seat, equal: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	black	galvanized
1/2 × 1	available on request	available on request
1/2 × s	available on request	available on request
3/4 × 1 1/4	available on request	available on request
1 × 1 1/2	available on request	available on request
1 1/4 × 2	available on request	available on request
1 1/2 × 2 1/4	available on request	available on request
2 × 2 3/4	available on request	available on request
2 1/2 × 3 1/2	available on request	available on request
3 × 4	available on request	available on request
1 x 3/4 × 1 1/2	available on request	available on request
2	to order	to order
1 1/4 x 1 × 2	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 373 Union bush flat seat · 3 sizes

Dimensional sketch of fitting No. 373 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 373 Union bush flat seat: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	black	galvanized
3/4 × 1 1/4	27	15	available on request	available on request
1 × 1 1/2	29	15	available on request	available on request
1 1/4 × 2	33	17	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 374 Union nut · 14 sizes

Dimensional sketch of fitting No. 374 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 374 Union nut: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	black	galvanized
× 3/4	available on request	available on request
3/8 × s	available on request	available on request
1/2 × 1	to order	available on request
1/2 × s	available on request	available on request
3/4 × 1 1/4	available on request	available on request
3/4 34,4 × 1 1/4	available on request	not made in this finish
1 × s	available on request	available on request
1 × 1 1/2	available on request	not made in this finish
*** - × 1 42,5	available on request	not made in this finish
1 1/4 × 2	available on request	available on request
1 1/2 × 2 1/4	available on request	available on request
2 × 2 3/4	available on request	available on request
2 1/2 × 3 1/2	available on request	available on request
3 × 4	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 376 Union bush flat seat · 7 sizes

Dimensional sketch of fitting No. 376 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 376 Union bush flat seat: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	s	black	galvanized
1	43	26	to order	to order
s × 1 1/8	41.5	26	available on request	available on request
3/4 × 1 1/4	48	32	available on request	available on request
1 × 1 1/2	54	38	available on request	available on request
1 1/4 × 2	57	48	available on request	available on request
1 1/2 × 2 1/4	61	54	available on request	available on request
2 × 2 3/4	71	66	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 378 Distribution union bush, flat seat · 3 sizes

Dimensional sketch of fitting No. 378 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 378 Distribution union bush, flat seat: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	b	black	galvanized
3/4 × 1 1/4	153	74	not made in this finish	available on request
1 × 1 1/2	146	67	not made in this finish	available on request
1 1/4 × 2	141	59	not made in this finish	available on request

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

Other fittings

No. 471 Bracket elbow · 3 sizes

Dimensional sketch of fitting No. 471 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 471 Bracket elbow: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	black	galvanized
3/8	not made in this finish	to order
1/2	not made in this finish	from stock
3/4	not made in this finish	to order

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

No. 526 Extension tube · 17 sizes

Dimensional sketch of fitting No. 526 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 526 Extension tube: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	a	z	black	galvanized
3/8 100	100	90	available on request	available on request
	Dimensions on request		available on request	available on request
1/2 50	50	37	available on request	available on request
1/2 60	60	47	available on request	available on request
1/2 70	70	57	available on request	available on request
1/2 80	80	67	available on request	available on request
1/2 100	100	87	available on request	available on request
1/2 120	120	107	available on request	available on request
	Dimensions on request		available on request	available on request
	Dimensions on request		available on request	available on request
3/4 60	60	45	available on request	available on request
3/4 70	70	55	available on request	available on request
3/4 80	80	65	available on request	available on request
3/4 100	100	85	available on request	available on request
*- 1 40	40	23	available on request	available on request
1 80	80	63	available on request	available on request
1 100	100	83	available on request	available on request

● from stock · ○ to order · – available on request · / not made in this finish

In our shop: galvanized

↑ Back to the type selection

No. 901 Stopcock spanner · 4 sizes

Dimensional sketch of fitting No. 901 with the dimension letters of the table

Picture and dimensional sketch: Georg Fischer

No. 901 Stopcock spanner: sizes in inches, dimensions in mm (letters as in the dimensional sketch), availability per finish.
Size (inch)	black	galvanized
10	available on request	not made in this finish
12	available on request	not made in this finish
14	available on request	not made in this finish
17	available on request	not made in this finish

● from stock · ○ to order · – available on request · / not made in this finish

↑ Back to the type selection

How to read the table

The letters above the columns are the dimensions of the sketch beside them, all in millimetres. The size is the thread size in inches; it names the pipe, not a diameter – a pipe thread R 1/2 measures about 21 mm outside. Whether from stock, to order or available on request is shown per finish in the last two columns.

What the numbers mean, which thread seals and when black or galvanized is right is explained on the page Malleable iron fittings.

Do you need this threaded fitting?

What you see here, we carry – from stock or to order; what is missing, we find.

Send us what you have – designation, standard, quantity, date. We check the match and availability and get back to you.

Send an inquiry

Your inquiry to Zickwolff

Send us what you have – designation, standard, quantity, date. We will clarify the rest with you.

One item or a question

Send inquiry

Not in stock? We procure it – single items too.

Designation, standard and quantity are enough.

Several items

Send bill of materials

200 items? One parts list is enough – we deliver complete.

Attach it as a file.

Helpful if already known: project and country, date needed, certificates, packaging and language of the packing lists. If anything is missing, we will ask.

It is urgent

Request express

When do you need it? Express delivery, to the site if required.

Tell us by when you need the material – we will tell you what is possible.